The Intelligent range of Beam TrackALERT, Alert and Monitoring interfaces provides you with the flexibility to use an inbuilt GPS engine as is the case on the TrackALERT, RST030 range or the External GPS on the RST035 range. Both terminals provide input for two GPS signals either from an external antenna or any other external NMEA feed that may be available form another device. Priority can be set on the desired GPs input and then the terminal will automatically revert to the back up input.

There are several options available for using the tracking functionality of the TrackALERT unit. This includes the ability to preset the reporting to be sent at a predetermined periodic interval from X minutes up to every 244 Hours.

Another option is to use polling, this is where it is possible to send the terminal an SMS or SBD command and poll it for its current location and or status.

In the event of tracking for emergency situations it is possible to program the TrackALERT to send tracking reports only under Alarm/Alert conditions, the alarm may have been raised either automatically by a digital input or from a physical press of a button.

A key feature of the TrackALERT systems also enables the use of movement detection. When this setting is turned on, it the TrackALERT will only send tracking messages once the terminal has moved greater than a preset X degree. This is ideal for effectively managing costs of tracking data when not required. Even with this setting active it is still possible to POLL the vehicle at anytime for its location.

TrackALERT terminals provide a great deal of flexibility for configuring selected information to be sent with each tracking and or alert message. There are free text fields that enable specific company/personal information, identification tags, origin country, registration numbers and the like. It is also possible to select the level of detail required such as speed, height, direction, digital input status etc.

Using SMS or SBD with the intelligence built into the Beam RST100 and RST200 terminals it is possible to remotely configure the communication terminal as well, run diagnostic checks, check signal strength, temperature and call logs as well as the ability to have automated reporting for “still alive” reporting if required. It is also possible to perform some simple polling of a device plugged into the Log Port of the terminal. This can be a very cost effective means of low-level position and condition reporting.

The Iridium Satellite network provides a robust network for supporting a global tracking application, with global coverage from pole to pole and the use of low powered antennas that are omni directional this makes a Beam TrackALERT system your desired installation for any application.

All Beam terminals support all of the Iridium Data services available. This then provides a flexible means by which to communicate using one or more of the following protocols; Circuit Switched Data, Short Message Service, Direct Internet and Short Burst Data.

Whilst all data services are available on any Beam device, selected Beam terminals offer varying voice service features. Any voice supported terminal will allow the use of an Intelligent Handset, however the Beam Remote Satellite Terminal, RST100, allows the use of standard phone equipment through its intelligent RJ11 connectivity. This means that standard cordless, corded or PBX systems can be integrated for voice communications on this terminal.

The Beam Intelligent Handset, RST970, is an ideal accessory for voice and SMS communications. The handset is compact, lightweight, easy to install and comes complete with hang-up cup and mounting brackets. The handset has a built in ringer, supports full SMS functionality as well as an easy menu system to access phone settings. The Intelligent handset is included in an In-Vehicle Telephone Kit as well as the Beam RST973 In-vehicle accessory kit.

When using the Hands-free Interface (HFI), included with the RST620 or as an accessory with the other terminals this provides high quality, full duplex, and hands-free voice communications. Other key features of the HFI include; Horn Alert Radio Integration Radio Mute. The intelligent handset can be easily removed from its cradle if a private conversation is required.

Beam terminals will support the connection of a third party device through the DB9 Data connection, enabling Data Loggers, Meter Readers and other terminal devices to be easily connected to Satellite Communications. Beam terminals generally supports engine management type monitoring devices to enable communication through the satellite network via SMS, SBD or circuit switched data.

Whilst the installation and integration to the terminal is very straight forward, selecting the appropriate antenna and antenna cable for the installation is also important to ensure greatest call quality over the satellite network. There is a range of suitable antenna installation types for various applications. In order to maximize the signal penetration in some locations the antenna can be installed some distances away from the main terminal in a more appropriate location.

The antenna should always have as clear line of sight to the sky as possible, eight degrees above the horizon is always ideal, however the clearer the view to the sky the greater the reliability of service. 

The maximum loss for an antenna cable installed to any Iridium device is 3db maximum. Exceeding this loss will affect reliability and call quality.

Communication Terminals Supported

- Remote Satellite Terminal
- Remote Satellite Modem
- Remote Voice/Data Module
- In-vehicle Telephone
- Remote Data Module
- IntelliDOCK for 9505A

TrackALERT GPS Terminals

- TrackALERT-Inbuilt GPS
- TrackALERT-External GPS

Accessories

- Intelligent Handset
- Hands-free Interface
- Battery Backup
- Iridium Antennas
- GPS Antennas
- SSAS/Alarm Accessories

Key Solution Features:

Beam Equipment

- Ability to use standard telephone handsets (RST100 only)
- Robust Intelligent Handsets available
- Intelligent microprocessor on board
- Remote / Local configuration
- GPS input options
- Asset Tracking
- Remote Monitoring
- Alarm/Alert Reporting
- Omni directional antennas
- Full certified C, CE, A Ticks.
- Germanischer Lloyd & American Bureau of Shipping Approved
- Full Environment Certification IEC60945
- Power input options 11-32V DC
- Battery Backup / Solar options available
- Low power requirement

Iridium Service Features

- Low cost mobile to mobile calls
- Supports SMS & SBD
- Internet access at 10 kbps
- High quality voice
- Crew Calling
- 100% global coverage
- Prepaid or post paid service
- Low call set up time